IBS EUROFloor is a OSB3 (Oriented Strand Board) panel.
It is replacement for Strandboard, kopine untreated
Strand Board - OSB Eurofloor T&G
The product is a moisture resistant, engineered structural wood panel made from PEFC forests in Europe. IBS EUROFloor is specifically designed for the New Zealand market. IBS EUROFloor is engineered in Europe with our partner Swiss Krono from environmentally sustainable sources. IBS EUROFloor consists of three layers of wood strands bonded together with heat-cured adhesives.
Each layer is orientated at right angles to the adjacent layer creating a strong, dimensionally stable panel that resists delamination and warping. The absence of natural imperfections such as knots provides certainty of performance. IBS EUROFloor sheets are available in sizes of 2400 or 3600 x 1200 x 20mm and has a plastic tongue and groove jointing system along the long edge of the sheet.
As an OSB3 panel, manufactured in accordance with EN13986:2004, it is suitable for use in humid conditions where the panel in-service moisture content does not exceed 20%. Compliance with the NZ Building Code (NZBC) is established through product certification (CodeMark).
IBS EUROFloor may be used in all timber or steel framed buildings;
That comply with the NZ Building Code and NASH
Where installers have assured themselves that the existing building is suitable for the intended building work
On floor framing designs up to and including 3.0kPa UDL
On floor diaphragms for the transfer of wind and earthquake loads within the scope of NZS 3604
For stair construction
For packaging and manufacture of crates etc
For shelving
For use as cabinetry or furniture construction.
Buyer can pick up, however If this auction is to be transported by Toll or a similar freight company these goods WILL need to be strapped with gluts or put on a pallet for freight, as per their requirements.
Please check with your local carriers to get the best freight price.
please contact Toll or Mainfreight
